Netgear Smart Control Center Utility For Mac

  1. After you install it, the utility displays as NETGEAR USB Control Center on your computer. If necessary, unzip the ReadySHARE Printer utility setup file. Double-click the ReadySHARE Printer utility setup file that you downloaded. Follow the wizard instructions to install NETGEAR USB Control Center.
  2. The Smart Control Center Utility finds the switch and displays its MAC Address, IP Address, and model number. If you cannot configure your switch, verify that the cable connections are secure, that the IP address configuration of the PC is in the same subnet as the switch, and click the Discover button.

The best Circle experience is with NETGEAR. NETGEAR routers allow you to get the best of parental controls and full control of your family's internet usage within.

NETGEAR MS510TXPP 8-Port PoE+ Multi-Gigabit Smart Managed Pro Switch with 10G Copper/Fiber Uplinks
#MS510TXPP-100NAS
List Price: $544.60
Our Price: $349.99

Overview:

Features:

  • 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G/5G with PoE+
  • 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G with PoE+
  • 4-port RJ-45 Gigabit Ethernet 10M/100M/1G with PoE+
  • 1-port RJ-45 10 Gigabit Ethernet Copper (100M/1G/2.5G/5G/10GBASE-T)
  • 1-port SFP+ 10 Gigabit Ethernet Fiber (1G/10GBASE-X SFP+)
  • 28.8dB max at 25°C (77°F) ambient

Introducing a new Gigabit, Multi-Gigabit and 10-Gigabit Smart Managed Pro Switch Family for future-proof deployments

Businesses need to be ready for future expansion: with incoming new multispeed devices, their wired network needs to expand its reach and scope to support speeds greater than 1 Gigabit. The IEEE 802.3bz standard paved the way for new 2.5 Gigabit and 5 Gigabit speeds in addition to legacy 1 Gigabit and 10 Gigabit per second. New servers, workstations, storage devices, and motherboards are coming with 802.3bz (NBASE-T) Multi-Gigabit Ethernet for 2.5X to 5X faster speeds up to 100 meters (323 feet) on legacy CAT5e / CAT6 cables.

That is why NETGEAR launched its new Multi-Gigabit Smart Managed Pro Switches with 10G Copper/Fiber Uplinks. Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the MS510TX and MS510TXPP give the exact speed required, with no downgrade. Also, the new NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle.

Access, Aggregation or Collapsed Core: You can now have your PCs, printers and routers/ firewalls connected at 1G and aggregate Multi-Gigabit Ethernet new devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.

Highlights:

Plenty of headroom with 1G, 2.5G, 5G and even 10G!

  • Two Multi-Gigabit RJ-45 ports that support 5G, 2.5G, and 1G
  • Two Multi-Gigabit RJ-45 ports that support 2.5G and 1G
  • Four 1G RJ-45 ports
  • One dedicated 10G RJ-45 port (which also supports 5G, 2.5G and 1G) for uplink or local server / storage
  • One dedicated SFP+ fiber uplink port that supports 10G and 1G for uplink or local server / storage
Netgear Smart Control Center Utility For Mac

Key features include:

  • MS510TXPP: 180W PoE budget available across 8 Gigabit and Multi-Gigabit PoE+ ports (802.3at)
  • Multi-Gigabit, multi-speed ports to connect any type of device to a single switch
  • Quiet desktop operation or rack mounting with 21dB (MS510TX) or 28.8dB max (MS510TXPP) at 25°C (77°F) ambient
  • Layer 3 static routing with 32 routes (IPv4 and IPv6) for interVLAN local routing
  • Non-blocking 78Gbps fabric for 2x5Gbps+ 2x2.5Gbps+4x1Gbps+2x10Gbps full duplex switching and routing
  • Advanced VLAN support for better network segmentation
  • L2/L3/L4 access control lists (ACLs) for granular network access control including 802.1x port authentication
  • MS510TXPP: Advanced per port PoE controls for remote power management of PoE connected devices including operation scheduling (e.g. Wireless APs, IP security cameras, LED lighting, secure access door locks, IoT devices…)
  • Advanced QoS (Quality of Service) for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
  • Auto “denial-of-service” (DoS) prevention
  • IGMP Snooping and Querier for multicast optimization
  • Rate limiting and priority queuing for better bandwidth allocation
  • Port mirroring for network monitoring
  • Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
  • Cable test to troubleshoot connection issues
  • Easy-to-use Web browser-based management GUI
  • SNMP v1, v2c, v3 and RMON remote monitoring

Smart IT, not Big IT

  • Easy-to-use Web browser-based management GUI makes setup and management simple
  • Standards-based technology ensures interoperability with any standards-based devices in the existing network
  • Dual firmware images improve reliability and uptime to your network
  • Worry-free with NETGEAR ProSAFE LIFETIME Hardware Warranty*
  • Minimal down-time with NETGEAR ProSAFE LIFETIME Next-Business-Day Replacement Warranty
  • Get deployment assistance with 90-days Free 24x7 Advanced Technical Phone Support**
  • LIFETIME Online Chat Technical Support

* This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller, and modifications to product may void the warranty; covers hardware, fans, and internal power supplies - not software or external power supplies; see http://www.netgear.com/about/warranty/ for details. Lifetime technical support includes basic phone support for 90 days from purchase date and lifetime online chat support when purchased from a NETGEAR authorized reseller.
** The NETGEAR OnCall 24x7 contract provides unlimited phone and email technical support for your networking product. For ProSAFE products purchased prior to 06/2014, also includes next business-day hardware replacement.

Features and Benefits:

Netgear Smart Control Center Utility For Mac
Hardware Features:Benefits:
  • 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G/5G
  • 2-port RJ-45 Multi-Gigabit Ethernet IEEE 802.3bz (NBASE-T) 100M/1G/2.5G
  • 4-port RJ-45 Gigabit Ethernet 10M/100M/1G
  • 1-port RJ-45 10-Gigabit Ethernet Copper (100M/1G/2.5G/5G/10GBASE-T)
  • 1-port SFP+ 10-Gigabit Ethernet Fiber (1G/10GBASE-X SFP+)
Multi-Gigabit, multi-speed ports to connect any type of device to a single switch
USB Configuration PortQuickly and conveniently upgrade or restore firmware, load or backup configuration files, or download system log files for troubleshooting.
Energy Efficient Ethernet (IEEE 802.3az)Maximum power reduction for ongoing operation cost savings.
Software Features:Benefits:
Comprehensive IPv6 Support for Management, ACL and QoSBuild current network with future in mind. Ensure investment protection and a smooth migration to an IPv6-based network without switch replacement.
IPv4 & IPv6 Static RoutingA simple way to provide segmentation of the network with internal routing through the switch – reserving the router for external traffic routing only, making the entire network more efficient.
Robust security features:
  • 802.1x authentication (EAP)
  • Port-based security by locked MAC
  • ACL filtering to permit or deny traffic based on MAC and IP addresses
Build a secured, converged network with all types of traffic by preventing external attacks and blocking malware while allowing secure access for authorized users.
Comprehensive QoS features:
  • Port-based or 802.1p-based prioritization
  • Layer 3-based (DSCP) prioritization
  • Port-based ingress and egress rate limiting
Advanced controls for optimized network performance and better delivery of mission-critical traffic such as voice and video.
Auto-VoIP, Auto-Voice VLAN, and Auto-Video VLANAutomatic Voice over IP prioritization (Auto-VoIP) simplifies most complex multi-vendor IP telephone deployments either based on protocols (SIP, H.323 and SCCP) or on OUI bytes (default database and user-based OUIs) in the phone source MAC address, providing the best class of service to VoIP streams (both data and signaling) over other ordinary traffic by classifying traffic, and enabling correct egress queue configuration. Similarly, Auto-Video VLAN enables IGMP snooping to minimize broadcast streams.
IGMP Snooping and MLD SnoopingFacilitate fast receiver joins and leaves for multicast streams. Save cost and improve network efficiency by ensuring multicast traffic only reaches designated receivers without the need of an extra multicast router.
Protected PortsEnsure no exchange of unicast, broadcast, or multicast traffic between the protected ports on the switch, thereby improving the security of your converged network. This allows your sensitive phone phone conversations to stay private and your surveillance video clips can be forwarded to their designated storage device without leakage or alteration.
DHCP SnoopingEnsure IP address allocation integrity by only allowing DHCP messages from trusted DHCP servers and dropping malformed DHCP messages with a port or MAC address mismatch.
Dynamic VLAN Assignment (RADIUS)IP phones and PCs can authenticate on the same port but under different VLAN assignment policies. Users are free to move around and enjoy the same level of network access regardless of their physical location on the network.
Private VLANPrivate VLANs help reduce broadcast with added security.
Dual Firmware Images and Configuration FilesDual firmware images and dual configuration files for transparent firmware updates/configuration changes with minimum service interruption.

At a Glance:

Hardware at a glance
FrontRearSide
Model nameForm-Factor10M/ 100M/1G Copper Ports100M/1G/ 2.5G Copper Ports100M/1G/ 2.5G/5G Copper Ports100M/1G/ 2.5G/5G/10G Copper Ports 1G/10G SFP+ Fiber PortsPoE+ 802.3at Ports (Budget)Power SupplyFans
MS510TXDesktop
(Rackmount kit)
4221 (dedicated)1 (dedicated)-1 internal PSU, fixed1 internal fan, fixed
MS510TXPPDesktop
(Rackmount kit)
4 PoE+2 PoE+2 PoE+1 (dedicated)1 (dedicated)8 PoE+ (180W)1 internal PSU, fixed1 internal fan, fixed

Software at a glance
ManagementIPv4/IPv6 ACL and QoSIPv4/IPv6 Multicast filteringAuto-VoIP, Auto-VideoIEEE (802.3az) Energy Efficient EthernetVLANsConvergenceIPv4 & IPv6 Static Routing
Web Browser-based GUI (HTTP/HTTPS),
PC-Based Smart Control Center Utility (SCC)
RMON, SNMP
L2, L3, L4 IngressIGMP and MLD SnoopingYesYesStatic, Dynamic, Voice, MAC, Protocol-based, and PrivateLLDP-MED, RADIUS, 802.1XYes

Performance at a glance
Model NamePacket bufferCPUACLsMAC Address Table RP/NDP Table VLANsFabricLatency (Max Connection Speed)Static Routes (IPv4 & IPv6)Multicast IGMP Group
MS510TX1.5MB800MHz Dual-Core, 512MB RAM,256MB NAND Flash 164 shared (ingress)16K MAC
512 ARP/NDP
256 VLANs
78Gbps line-rate10GBASE-T: <2.36 μs
10GBASE- X SFP+: <2.60 μs
IPv4: 32
IPv6: 32
512
MS510TXPP1.5MB800MHz Dual-Core, 512MB RAM,256MB NAND Flash164 shared (ingress)16K MAC
512 ARP/NDP
256 VLANs
78Gbps line-rate10GBASE-T: <2.34 μs
10GBASE-X SFP+: <2.61 μs
IPv4: 32
IPv6: 32

Model Comparison:

Technical Specifications
Models:MS510TXMS510TXPP
Product Specifications
10M/100M/1G RJ-45 copper ports44
100M/1G/2.5G RJ-45 copper ports22
100M/1G/2.5G/5G RJ-45 copper ports22
100M/1G/2.5G/5G/10G RJ-45 copper ports1 (dedicated)1 (dedicated)
1G/10G SFP+ (fiber) ports1 (dedicated)1 (dedicated)
USB port (for config file upload/backup & firmware updates)YesYes
Performance Specifications
Packet buffer memory (Dynamically shared across only used ports) 1.5 MB 1.5 MB
Forwarding modesStore-and-forwardStore-and-forward
Bandwidth78 Gbps78 Gbps
1G Copper Latency (64 byte packet size)<2.60 µs<2.60 µs
2.5G Copper Latency (64 byte packet size)<19.42 µs<19.42 µs
5G Copper Latency (64 byte packet size)<13.4 µs<13.4 µs
10G Copper Latency (64 byte packet size)<2.36 µs<2.36 µs
10G Fiber Latency (64 byte packet size)<2.61 µs<2.61 µs
Priority queues88
Priority queuingWeighted Round Robin (WRR) and Strict Priority
MAC Address database size (48-bit MAC addresses) 16K 16K
Multicast groups512512
Number of IPv4 static routes3232
Number of IPv6 static routes3232
Number of VLANs256256
Number of ARP cache entries512512
Number of DHCP snooping bindings1K1K
Access Control Lists (ACLs)164 shared for MAC, IP and IPv6 ACLs
Packet forwarding rate (64 byte packet size) (Mfps or Mpps)5858
Jumbo frame supportUp to 10K packet size
Acoustic noise level @ 25°C (dBA) (ANSI-S10.12)21 dBA28.8 dBA
Mean Time Between Failures (MTBF) @ 25°C1,078,683 hour376,434 hours
L2 Services - VLANS
Models:MS510TXMS510TXPP
IEEE 802.1Q VLAN taggingYesYes
IP-based VLANs YesYes
MAC-based VLANsYesYes
Auto-VoIP VLAN / Auto-Voice VLANYes, based on OUI bytes (default database and user-based OUIs) in the phone source MAC address, voice packets must have 802.1Q VLAN tag
Auto-VoIP Yes, based on protocols (SIP, H.323 and SCCP). Prioritzes traffic to a higher queue
Voice VLANYesYes
Auto-Video VLANYesYes
Private VLANYesYes
L2 Services - Availability
Broadcast, multicast, unknown unicast storm controlYesYes
IEEE 802.3ad - LAGs (LACP)YesYes
IEEE 802.3x (full duplex and flow control)YesYes
IEEE 802.1D Spanning Tree ProtocolYesYes
IEEE 802.1w Rapid Spanning Tree ProtocolYesYes
IEEE 802.1s Multiple Spanning Tree ProtocolYesYes
L2 Services - Multicast Filtering
IGMP snooping (v1, v2 and v3)YesYes
MLD snooping support (v1 and v2)YesYes
IGMP snooping queriesYesYes
Block unknown multicastYesYes
L3 Services - DHCP
IPv4 static routingYesYes
IPv6 static routingYesYes
VLAN routingYesYes
Host ARP table (number of entries)YesYes
Number of IP VLAN interfaces (routed VLANs)YesYes
Link Aggregation
Models:MS510TXMS510TXPP
IEEE 802.3ad - LAGs (LACP)YesYes
Manual Static LAGYesYes
# of Static or LACP LAGs
# of members in each LAG
8 LAGs with max 8 members in each LAG
Network Monitoring and Discovery Services
802.1ab LLDPYesYes
SNMPv1, v2c, v3v1, v2c, v3
RMON group 1,2,3,9YesYes
Network Security
IEEE 802.1xYesYes
Guest VLANYesYes
RADIUS-based VLAN assignment via .1xYesYes
MAC-based .1xYesYes
RADIUS accountingYesYes
Access Control Lists (ACLs)L2 / L3 / L4 ingressYes
IP-based ACLs (IPv4 and IPv6)YesYes
MAC-based ACLsYesYes
TCP/UPD-based ACLsYesYes
MAC lockdownYesYes
MAC lockdown by the number of MACsYesYes
Control MAC # Dynamic learned entries600Yes
Control MAC # static entries600Yes
IEEE 802.1x RADIUS port access authenticationYesYes
Port-based security by locked MAC addressesYesYes
Dynamic ARP inspectionYesYes
Broadcast, multicast, unknown unicast storm controlYesYes
DoS attacks preventionYesYes
Quality of Service (QoS)
Models:MS510TXMS510TXPP
Port-based rate limiting Ingress and egressIngress and egress
Port-based QoSYesYes
Support for IPv6 fieldsYesYes
DiffServ QoSYesYes
IEEE 802.1p COSYesYes
Destination MAC and IPYesYes
IPv4 and v6 DSCPYesYes
IPv4 and IPv6 ToSYesYes
TCP/UDP-basedYesYes
Weighted Round Robin (WRR)YesYes
Strict priority queue technologyYesYes
Auto-VoIP VLAN / Auto-Voice VLANYes, based on OUI bytes (default database and user- based OUIs) in the phone source MAC address, voice packets must have 802.1Q VLAN tag
Auto-VoIPYes, based on protocols (SIP, H.323 and SCCP). Prioritzes traffic to a higher queue
Voice VLANYesYes
Auto-Video VLANYesYes
IEEE Network Protocols
IEEE Network Protocols
  • IEEE 802.3 Ethernet
  • IEEE 802.3u 100BASE-T
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3an 10GBASE-T 10Gbps Ethernet Over Copper Twisted Pair Cable
  • IEEE 802.3ae 10-Gigabit Ethernet Over Fiber (10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-LX4) - All models
  • IEEE 802.3z Gigabit Ethernet 1000BASE-SX/LX
  • IEEE 802.3x Full-Duplex Flow Control
  • IEEE 802.1Q VLAN Tagging
  • IEEE 802.3ad Trunking (LACP)
  • IEEE 802.1AB LLDP with ANSI/TIA-1057 (LLDP-MED)
  • IEEE 802.1p Class of Service
  • IEEE 802.1D Spanning Tree (STP)
  • IEEE 802.1s Multiple Spanning Tree (MSTP)
  • IEEE 802.1w Rapid Spanning Tree (RSTP)
  • IEEE 802.1x RADIUS Network Access Control
  • IEEE 802.3az Energy Efficient Ethernet (EEE)
Management
Models:MS510TXMS510TXPP
Password managementYesYes
Configurable management VLANYesYes
Admin access control via RADIUS and TACACS+YesYes
IPv6 managementYesYes
SNTP client over UDP port 123YesYes
SNMP v1/v2cYesYes
SNMP v3 with multiple IP addressesYesYes
RMON group 1,2,3,9YesYes
Port mirroringYesYes
Many-to-one port mirroring88
Web browser-based graphical user interface (GUI)YesYes
Smart Control Center (SCC) for multi-switch managementYesYes
Dual software (firmware) imageYesYes
Dual configuration fileYesYes
Cable test utilityYesYes
SSL/HTTPS Web-based access (version)Yes (v2) Yes (v2)
TLS Web-based access (version)Yes (v1.0 ~ v1.2)Yes (v1.0 ~ v1.2)
File transfers (uploads, downloads)TFTP / HTTPTFTP / HTTP
HTTP upload/download (firmware)YesYes
Syslog (RFC 3164)YesYes
USB port for firmware and config upload / downloadYesYes
LEDs
Per portSpeed, Link, ActivitySpeed, Link, Activity, PoE Mode
Per devicePower and FanPower, Fan, Max PoE
Physical Specifications
Models:MS510TXMS510TXPP
Dimensions328 x 169 x 43 mm (12.9 x 6.7 x 1.7 in)328 x 169 x 43 mm (12.9 x 6.7 x 1.7 in)
Weight1.42 kg (3.13 lb)1.9 kg (4.19 lb)
Power Consumption
Max power (worst case, all ports used, line-rate traffic) (Watts) 26.1 W234.31 W
Min power (link-down standby) (Watts)10.19 W19.39 W
Heat Dissipation (max and min) (BTU/hr)Max: 89.06 BTU
Min: 34.77 BTU
Max: 799.50 BTU/hr
Min: 66.16 BTU/hr
Energy Efficient Ethernet (EEE) IEEE 802.3azYes (deactivated by default)
Power back-ofDrops power consumption by 15% to 20% when short copper cables are detected
Auto power downDrops power consumption when no connection
Fan11
Environmental Specifications
Operating Temperature0° to 50°C (32° to 122°F)
Operating Humidity90% maximum relative humidity, non-condensing
Operating Altitude10,000 ft (3,000 m) maximum
Storage Temperature–20° to 70°C (– 4° to 158°F)
Storage Humidity95% maximum relative humidity, non-condensing
Storage Altitude10,000 ft (3,000 m) maximum
Electromagnetic Emissions and Immunity
Certifications
  • CE: EN 55032:2012+AC:2013/CISPR 32:2012, EN 61000-3-2:2014, Class A, EN 61000-3-3:2013, EN 55024:2010
  • VCCI : VCCI-CISPR 32:2016, Class A
  • RCM: AS/NZS CISPR 32:2013 Class A
  • CCC: GB4943.1-2011; YD/T993-1998; GB/T9254-2008 (Class A)
  • FCC: 47 CFR FCC Part 15, Class A, ANSI C63.4:2014
  • ISED: ICES-003:2016 Issue 6, Class A, ANSI C63.4:2014
  • BSMI: CNS 13438 Class A
Safety
Certifications
  • CB report / certificate IEC 60950-1:2005 (ed.2)+A1:2009+A2:2013
  • UL listed (UL 1950)/cUL IEC 950/EN 60950
  • CE LVD: EN 60950-1: 2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
  • RCM (AS/NZS) 60950.1:2015
  • CCC (China Compulsory Certificate): GB4943.1-2011; YD/T993-1998; GB/T9254-2008 (Class A)
  • BSMI: CNS 14336-1
Warranty and Support
ProSAFE Lifetime WarrantyIncluded, Lifetime*
Lifetime 24x7 Online Technical Support*Included, Lifetime*
Lifetime Next-Business-Day (NBD) ReplacementIncluded, Lifetime*
ProSUPPORT OnCall 24x7, Category 2** Service PacksCategory 2:
PMB0312 (1 yr.)
PMB0332 (3 yrs.)
PMB0352 (5 yrs.)
Package Contents
All Models
  • Multi-Gigabit Ethernet Smart Managed Pro Switch
  • Power cord (localized to country of sale)
  • Rack-mounting kit
  • Rubber footpads for tabletop installation
  • Quick install guide
  • Resource CD with installation guides, Smart Control Center utility software, MIB files, and links to additional online documentation including the Web browser-based management GUI User Manual and datasheet.

* This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller, and modifications to product may void the warranty; covers hardware, fans, and internal power supplies - not software or external power supplies; see http://www.netgear.com/about/warranty/ for details. Lifetime technical support includes basic phone support for 90 days from purchase date and lifetime online chat support when purchased from a NETGEAR authorized reseller.
** The NETGEAR OnCall 24x7 contract provides unlimited phone and email technical support for your networking product. For ProSAFE products purchased prior to 06/2014, also includes next business-day hardware replacement.

Center

Network Diagram:

Desktop Switch with 10G Uplinks Application 1

Collapse Core for Advanced Small Businesses

Desktop Switch with 10G Uplinks Application 2

Departmental / Relay IP Surveillance Switch (Local Government, Hospitalities, Industry)

Desktop Switch with 10G Uplinks Application 3

IDF / Distribution Switch for Wireless LAN Access in K12

Documentation:

Download the NETGEAR Multi-Gigabit Ethernet Smart Managed Pro Switches Datasheet (PDF).

Pricing Notes:

  • Pricing and product availability subject to change without notice.
NETGEAR MS510TXPP 8-Port PoE+ Multi-Gigabit Smart Managed Pro Switch with 10G Copper/Fiber Uplinks
#MS510TXPP-100NAS
List Price: $544.60
Our Price: $349.99
Netgear Smart Control Center Utility For MacNetgear Smart Control Center Utility For Mac
NETGEAR ProSupport Service - Learn More

Netgear Smart Control Center Utility For Mac Osx

#PMB0331NA
Our Price: $156.00